manualshive.com logo in svg

Brother 2400c - Color Laser Printer, User Manual, Page: 210 / 280

Share
Download
Brother 2400c - Color Laser Printer User Manual Download Page 210

APPENDICES

A-9

Signal Description

Pin No.

Signal Name

IN/OUT

Explanation

1

DATA STROBE

IN

Data is latched at the leading edge of this

signal.

2 - 9

 

DATA 0 - 7

IN

Parallel 8 bit data

10

ACKNLG

OUT

Data reception is completed and the printer is

ready for the next data reception when this
signal becomes low.

11

 

BUSY

OUT

The printer cannot receive data when this
signal is high. The signal becomes high under
data receiving, off-line, or error states.

12

 

PE

OUT

This signal becomes high when a paper
empty state is detected.

13

 

SLCT

OUT

This signal becomes high when the printer is
selected and low when it is deselected.

14

AUTO FEED

IN

This signal is used only for the bi-directional

interface.

31

INPUT PRIME

IN

This signal is used only for the bi-directional

interface.

32

FAULT

OUT

This signal becomes low when the printer is

in the paper empty, off-line, or error states.

36

SLCT IN

IN

This signal is used only for the bi-directional

interface.

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Reviews:

No comments