manualshive.com logo in svg

Brother 2400c - Color Laser Printer, User Manual, Page: 16 / 280

Share
Download
Brother 2400c - Color Laser Printer User Manual Download Page 16

USER’S GUIDE

xvi

Radio Interference(220-240 V model only)

This printer complies with EN55022(CISPR Publication 22)/Class B.

Before this product is used, ensure that you use a double-shielded
interface cable with twisted-pair conductors and that is marked
“IEEE1284 compliant”. The cable must not exceed 1.8 metres in length.

IEC 825 Specification (220-240 V model only)

This printer is a Class 1 laser product as defined in IEC 825
specifications. The label shown below is attached in countries where
required.

This printer has a Class 3B Laser Diode which emits invisible laser
radiation in the Scanner Unit. The Scanner Unit  should not be opened
under any circumstances.

☛

  Caution:

Use of controls, adjustments or performance of 

procedures other than those specified in this manual 
may result in 

hazardous radiation exposure.

The following caution label is attached on the cover of the scanner unit.

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Reviews:

No comments