Breckwell BH6113LFP Page 22 Manual Download

Page: 22 / 64

-22-

REMOTE CONTROL FUNCTIONS

NOTE: You will hear a beep once every time a remote-control button is

pressed, signaling that the command has been received. Locate the four

function buttons on the remote control:

1. On/Off Button: This button turns the appliance on or off. When this

button is depressed, and the system is off, the pilot will ignite. After

pilot ignition, the pilot will light the main burners. Refer to IPI and CPI

Modes in this manual for pilot ignition.

2. Thermostat Button: This button will allow the selection of three modes:

Manual, Normal Thermostat, and Smart Thermostat. NOTE: The

fireplace will automatically shut off after 12 hours of continuous use.

a. Manual (Off): In this mode, the appliance can be turned on,

regardless of the room temperature. The actual room temperature

has no effect in this mode. All other functions such as fan speed

control, flame height control, and accent light intensity controls

are manually controllable.

b. Normal Thermostat (On): Will turn itself on and off, depending

on the temperature you set. When you set the thermostat, it will

continue heating until the room temperature increases 1°F above

the set thermostat temperature. To increase the thermostat

temperature, press the up button until the desired temperature is

displayed in the thermostat temperature window. The fan will turn

on 5 minutes after startup and will turn off 12 -1/2 minutes after the

flames turn off. The flame height can be adjusted while in use, fan speed can be adjusted after 5 minutes

of startup. The accent light can be adjusted any time after startup.

Smart Thermostat (Smart): In this mode, room temperature is maintained, and flame height adjusts

automatically to provide continual, efficient heat. All other functions of the normal thermostat mode,

except the flame height adjustment, are allowed. Manual flame height adjustment is not allowed in this

mode. The Smart Thermostat function adjusts the flame height in accordance to the difference between

the set point temperature and the actual room temperature. As the room temperature gets closer to the

set point temperature, the Smart Thermostat automatically modulates the flame down.

Up/Down Button: This button is used to increase or decrease the thermostat temperature, flame height, fan

speed, and accent light intensity.

Mode Selection Button: This button is used to toggle between the various function icons: flame height, fan

speed, accent light, and rear burner (certain models).

AUTOMATIC SAFETY RESTART

This system will execute an automatic turn off command within (24) hours of a continued pilot flame ignition. This

allows the system to verify correct safety functions. After the turn off sequence is completed, the ignition module

will re-execute the latest command.

TURN ON FUNCTION

5. Press the on/off button. The remote-control display will show all active icons on the screen.
6. Select the thermostat mode by pressing the thermostat button: OFF (meaning Manual), ON (meaning Normal

Thermostat) or Smart (meaning Smart Thermostat).
a. If the thermostat icon displays as “OFF” (Manual), it will ignite and start on Hi.
b. If the thermostat icon displays as “ON” (Normal Thermostat), it will only ignite if the thermostat temperature

is greater than the room temperature.

c. If the thermostat icon displays as “SMART” (Smart Thermostat), it will only ignite if the thermostat temperature

is greater than the room temperature.

TURN OFF FUNCTION

Press the on/off button.

OFF

MANUAL

MODE

NORMAL

THERMOSTAT

SMART

MODE