BRAYER BR2701, Instruction Manual, Page: 5 / 104

5 EN
SAFETY MEASURES AND OPERATION
RECOMMENDATIONS
Read the operation instructions carefully before
using the Bread maker and keep it for future
reference.
• Use the Bread maker for its intended purpose only,
as it is stated in this manual.
• Mishandling the Bread maker can lead to its
breakage and cause harm to the user or damage to
his/her property and it is not covered by warranty.
• Make sure that operating voltage of the Bread maker
indicated on the label corresponds to your home
mains voltage.
• The power plug is equipped with a grounding contact,
plug it into the socket with reliable grounding contact.
In case of short circuit the grounding reduces the risk
of electric shock.
• Contact an electrical technician, if you are not
sure that your sockets are installed properly and
grounded.
• To prevent fire do not use adapters designed for
connecting the plug to the mains socket without
grounding contact.
• In case of sparking in the mains socket and
occurrence of smell of burning, unplug the unit and
apply to the organization maintaining your home
mains.
• If smoke appears from the body of the Bread maker,
unplug the unit and take measures to prevent fire
spreading.
• Do not use the Bread maker outdoors.
• It is not recommended to use the unit during lightning
storms.
• Protect the unit from impacts, falling, vibrations and
other mechanical stress.
• Do not place the Bread maker next to the walls or
close to the kitchen furniture.
• Place the Bread maker keeping at least 20 cm gap
between the Bread maker body and the wall and at
least 50 cm gap above the Bread maker .
• Never leave the plugged-in Bread maker unattended.
• Do not use the Bread maker in proximity to kitchen
sink, in bathrooms, near swimming pools or other
containers filled with water.
• Do not use the Bread maker near heating appliances,
heat sources or open flame.
• Do not use the Bread maker in places where
aerosols are used or sprayed, and in proximity to
inflammable liquids.
• Place the Bread maker on a flat stable surface; do
not place it on the edge of a table. Do not let the
power cord hang from the edge of the table and
make sure it does not touch hot surfaces or sharp
edges of furniture.
• During the operation do not touch hot surfaces of the
bread maker.