BRAYER BR2701, Instruction Manual, Page: 21 / 104

21 DE
• After use wash the form (3) and the paddle (4) with
warm water using neutral detergent, rinse and dry
them. Install the paddle (4) in the form (3), install the
form (3) in the bread maker, close the lid (5).
CLEANING AND MAINTENANCE
• Switch the bread maker off, unplug it, open the lid (5)
and let the bread maker cool down.
• Remove the baking form (3).
• Clean the body (1) and the lid (5) with a slightly damp
cloth, then wipe it dry.
• Wash the baking form (3), the paddle (4), the
measuring cup (25), the hook (26) and the spoon
(27) with warm water with neutral detergent, rinse
and dry them.
• Note: — if the paddle (4) can not be removed from
the axle, fill the form (3) with warm water and wait for
about 20-30 minutes.
• Do not use metal objects or scourers, abrasive
detergents and solvents for cleaning the bread maker
and the baking form (3).
• Dry the baking form (3) and the paddle (4) thoroughly
before installing them in the bread maker.
• If the inner surface of the bread maker is dirty,
remove dirt and wipe the surface with a slightly damp
cloth, then wipe it dry.
• Do not immerse the bread maker body, the power
cord and the power plug into water or any other
liquids.
STORAGE
• Clean the bread maker before taking it away for
storage.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
Before applying to the service center.
Malfunction Possible reason Troubleshooting method
The bread maker cannot be
switched on. The symbols
«HHH» appear on the
display.
The bread maker has not cooled down yet
after the previous baking.
Switch the bread maker off and unplug it. Remove the
baking form and let the bread maker cool down to the
room temperature.