BRAND HandyStep touch, Operating Manual

Page: 60 / 234

60
Battery
WARNING
Damaged or incorrect battery
Possible personal injury

Use only the original battery.
 Use only the original power adapter.

Do not puncture, bend, ignite, compress, short circuit or
overheat.
 Do not touch a leaking battery.

Dispose of damaged batteries in accordance with legal
requirements.

Do not store or operate the battery at a temperature
above 60 °C (140 °F).
 Follow the instructions on the battery.
NOTICE
 Charge the battery completely before the first use or if you have not used
the device for an extended time. This prevents premature wear of the
battery.
 Replace the battery after its service life has been exceeded (~ 3 years), in
case of deformation or in the event of extremely short charging cycles and
a resulting shorter duration of use.

When storing the device for extended periods, disconnect the battery plug.
Components
1.
Battery
2. Contacts
3.
Reverse polarity protected
plug
4. Cable
Label, rear side
1.
Battery type and use
2. Part identification
3. CE marking
4. Warning label
Connecting the battery
a. b. c.
Open the cover and connect the battery’s reverse polarity protected plug
firmly and straight into the socket. The device switches on when you have
connected the battery. Then close the cover.