Boston Whaler 210 Montauk, Owner'S Manual

Page: 78 / 113

3-9
210 Montauk
Section 3 • Systems & Components Overview & Operation Section 3 • Systems & Components Overview & Operation
R
Livewell (Option)
Fig. 3.9.1
1
2
3
25 GAL (94.6 L) LIVEWELL TANK*
LIVEWELL FILL HOSE
RAW WATER INTAKE SEACOCK/PUMP
THRU-HULL DRAIN/SEACOCK
TO THRU-HULL DRAIN
LIVEWELL LIGHT
OVERFLOW DRAIN
4
5
6
7
FLOW CONTROL VALVE
LIVEWELL FILL/CONTROL VALVE
BOTTOM DRAIN W/PLUG
8
Maintenance
Maintenance of the livewell system will require you
to check the seacock intake strainer for debris and
impediments, this can be done visually on dry land.
The intake strainer is located on the bottom aft of the
hull on the port side.
2
3
4
5
6
7
9
1
5
10
* Optional Deluxe Leaning Post
has 30 gal (113.6 L) livewell tank
7
9
9
A flow control valve (Figure 3.9.1) at the livewell
fill inlet controls the flow of water into the
livewell. To increase the water flow, turn the valve
counterclockwise. To decrease flow, turn the valve
clockwise.
on the optional switch panel located on the console
(See fig. 2.13.2). The livewell bucket has an overflow
fitting attached to the drain.
Be sure the hull seacocks are in the open position. The
seacocks can be reached by removing the motorwell
hatch. Turn the seacock counterclockwise to OPEN.
NOTICE
Having both the raw water seacock and flow
control valve open at the same time will fill the
livewell with water.
8
10
OPEN
CLOSED
NOTICE
The thru-hull drain/seacock (See fig. 3.9.1)
MUST be in the OPEN to avoid livewell from
overflowing.
ATTENTION
The seacock must be in the open position when
livewell is in use. Running the pump dry may
cause damage to the unit.