Boston Whaler 210 Montauk, Owner'S Manual

Page: 76 / 113

3-7
210 Montauk
Section 3 • Systems & Components Overview & Operation Section 3 • Systems & Components Overview & Operation
R
TRANSFE
R
DOCK
START
STOP
THROTTLE ON
LY
N
• Press and hold the
“THROTTLE ONLY“
button while moving
the control handle
ahead to the forward
position.
Stopping the Engine
• Be sure that the gear
shift and throttle
control handle is
in the NEUTRAL
position
• Turn Key to the “OFF”
position.
• Turn the battery switch
“OFF”.
• Advance the control
handle to increase
engine RPM.
NOTE : Engine RPM is
limited to prevent engine
damage.
• To disengage, return the
control handle back
to the neutral position.
The warm-up mode can be re-activated by turning
the engine off and re-starting.
REFER TO THE ENGINE MANUFACTURER’S
MANUAL IN YOUR OWNER’S MANUAL PACKET FOR
COMPLETE INSTRUCTIONS.
OF
F ON START
!
CAUTION
NEVER turn the battery switch to the “OFF”
position while the engine is running. Equipment
damage will occur.
TRANSFE
R
DOCK
START
STOP
THROTTLE
ONLY
N
TRANSFE
R
DOCK
START
STOP
THROTTLE
ONLY
N
TRANSFE
R
DOCK
START
STOP
THROTTLE
ONLY
N
Hydraulic Power Steering (Option)
If equipped, the Verado
four-stroke engines use an
enclosed hydraulic pump
unit. The pump is electri-
cally operated to provide
hydraulic pressure to
the steering system.
The
pump is located in the aft
bilge and can be accessed
by removing the hatch in
the motorwell.
Filling & Maintenance
The system is virtually maintenance free, aside from
regular fluid checks and visually inspecting the out -
side of the unit for signs of leaks or damage.
• Remove the pump cover
by pulling up and out on
the locking tabs on the
sides of the unit.
• Unscrew the cap
a n d c h e c k t h e
f l u i d l e v e l i n
the reservoir, fill
ONLY with SAE
0W-30 Full Synthetic Power Steering Fluid if
necessary.
• Replace cap and cover.
NOTICE
Ensure that cover is properly seated to prevent
intrusion of water into the pump enclosure.