Boston Whaler 210 Montauk, Owner'S Manual

Page: 45 / 113

2-2 190 Montauk
Section 2 • General Information
R
210 Montauk
CANADIAN COMPLIANCE NOTICE
AVIS DE CONFORMITÉ
CANADIEN
BOSTON WHALER (BWC)
EDGEWATER, FL, USA
MODEL / MODÈLE:
DESIGN CATEGORY
THE MANUFACTURER DECLARES THAT THIS PRODUCT COMPLIES WITH THE
PLEASURE CRAFT CONSTRUCTION REQUIREMENTS OF THE SMALL VESSEL
REGULATIONS
AS THEY READ ON THE DAY ON WHICH THE CONSTRUCTION OF
THE VESSEL WAS STARTED OR ON THE DAY ON WHICH THE VESSEL WAS
IMPORTED.
LE FABRICANT ATTESTE QUE CE BÂTIMENT EST CONFORME AUX EXIGENCES
DE CONSTRUCTION DES EMBARCATIONS DE PLAISANCE DU RÈGLEMENT SUR
LES PETITS BÂTIMENTS, EN VIGUEUR À LA DATE DU DÉBUT DE SA
CONSTRUCTION OU À LA DATE DE SON IMPORTATION.
C
210 MONTAUK
9
BOSTON WHALER, INC.
21MTK
149
C
kW
1270
kg
Edgewater, FL USA
The number of persons on board must be reduced if
you go out in poor weather and rough water.
The information present on the certification plate
does not relieve the operator from responsibility. Use
common sense and sound judgement when placing
equipment and/or passengers in your boat.
• Do not load to capacity in poor weather or rough
water.
• The number of seats does not indicate how many
people a boat can carry in poor weather and rough
water
• Above idle speed, all passengers must be
seated on the seats provided.
An
NMMA Certification means that your Boston
Whaler
®
has been judged by the National Marine
manufacturers Association to be in compliance with
applicable federal regulations and American Boat
and Yacht Council standards.
A
Canada Conformity Sticker means that your
Boston Whaler
®
has been certified to comply with
construction standards for small vessels by Transport
Canada.
A
CE mark means that your Boston Whaler
®
has
been certified with the applicable international
Organization for Standardization directives.
An
Australian Builder’s plate means that your
Boston Whaler
®
has been certified to comply with
safety standards set by the National Marine Safety
Committee.
!
DANGER
NEVER carry more weight or passengers than
indicated on the certification plate, regardless
of the weather or water conditions.
Certification Plates
Fig. 2.2.1
NMMA CERTIFICATE
CANADA CONFORMITY STICKER
CE MARK (INT’L) BUILDER’S PLATE
AUSTRALIAN BUILDER’S PLATE
1
2
3
2
3
Replacement Part No. 2301739
Replacement Part No. 2301741
Replacement Part No. 2301738
AUSTRALIAN BUILDERS PLATE
MANUFACTURER:
MODEL:
INFORMATION DETERMINED:
MAX OUTBOARD:
MAX PERSONS:
MAX LOAD:
BOSTON WHALER, INC. - USA
210 MONTAUK
ISO STANDARDS
1270 kg
9 = 675 kg
! WARNING
ALTERATION OF THE BOAT’S HULL OR PERMANENT FITTINGS
MAY INVALIDATE THE PARTICULARS ON THIS PLATE
149 kw; 312 kg
Replacement Part No. 2301737
4
4
1
MAXIMUM CAPACITIES
9
PERSONS OR LBS.
1488
2800
LBS. PERSONS, MOTOR, GEAR
H.P. MOTOR 200
MANUFACTURER:
MODEL:
BOSTON WHALER
EDGEWATER, FL 32141 210 Montauk
NATIONAL MARINE MANUFACTURERS ASSN.
THIS BOAT COMPLIES WITH U.S. COAST GUARD SAFETY
STANDARDS IN EFFECT ON THE DATE OF CERTIFICATION
DESIGN COMPLIANCE WITH NMMA REQUIREMENTS BELOW IS
VERIFIED. MFGR. RESPONSIBLE FOR PRODUCTION CONTROL.
LOAD AND H.P. CAPACITY • LEVEL FLOTATION
STEERING, FUEL AND ELECTRICAL SYSTEMS
NAVIGATION LIGHTS • MANEUVERABILITY
CERTIFIED