AutoDome Easy II
Getting Started | en
79
Bosch Security Systems, Inc.
Installation Manual
F.01U.164.478 | 2.0 | 2010.02
To change or clear an address for a camera with an address:
1.
Select the camera number you want to
FastAddress
. The
system displays the camera number on the keyboard and
the image on the corresponding monitor.
2.
Press
#
-
ENTER
(where
#
is the camera number with an
address).
3.
Press
ON
-
998
-
ENTER
to invoke an on-screen display of all
cameras on the system, with or without an address.
4.
Follow the on screen instructions. You receive an on-
screen confirmation when the
FastAddress
is complete.
NOTICE!
FastAddress
is stored in nonvolatile memory and does not
change if the power is turned off or if the default settings are
restored.
