AutoDome Easy II
Getting Started | en
77
Bosch Security Systems, Inc.
Installation Manual
F.01U.164.478 | 2.0 | 2010.02
10.2.2
Keyboard Commands
Keyboard control commands are composed of a sequence of
three (3) inputs with the following convention: 1) a
Function
key + 2) a
Command
number key(s) + 3) the
Enter
key.
–
Depending on the type of keyboard, the control function
keys are labeled:
ON
or
AUX ON
OFF
or
AUX OFF
SET
or
SET SHOT
SHOT
or
SHOW SHOT
–
Command numbers range from 1 to 999. See Keyboard
Commands by Number for a complete list of keyboard
commands.
–
The
Enter
key can also be labeled with the 8 symbol.
For example, the keyboard command to make the AutoDome
Easy II pan 360º continuously is:
ON-1-ENTER
(press the
ON
key, then press the number
1
key,
and then press
ENTER
). To stop the camera from panning,
move the joystick in any direction.
10.3
Setting the Camera Address
Once the AutoDome Easy II power is turned on and homing is
complete, you must set the camera address. You may also want
to customize some of the AutoDome Easy II default settings.
NOTICE!
The convention used for control key commands in this manual
is
ON
,
OFF
,
SET
, and
SHOT
. Refer to your keyboard manual for
the key naming conventions.
NOTICE!
You do not need to set a camera address if using Bilinx.
