78
en | Getting Started
AutoDome Easy II
F.01U.164.478 | 2.0 | 2010.02
Installation Manual
Bosch Security Systems, Inc.
10.3.1
FastAddress
FastAddress is an AutoDome Easy II feature that allows the user
to set or change a camera address using the keyboard and on-
screen menus.
There are three (3)
FastAddress
commands:
–
ON
-
999
-
ENTER
: Displays and programs all cameras
without an address in the system.
–
ON
-
998
-
ENTER
: Displays and programs all cameras with or
without an address in the system.
–
ON
-
997
-
ENTER
: Displays the current address status of all
cameras in the system simultaneously.
To set an address for a camera without an address:
1.
Select the camera number you want to
FastAddress
. The
system displays the camera number on the keyboard and
the image on the corresponding monitor.
2.
Press
#
-
ENTER
(where
#
is the camera number without an
address).
3.
Press
ON
-
999
-
ENTER
to invoke an on-screen display of
cameras on the system without an address.
4.
Follow the on-screen instructions. You receive an on-
screen confirmation when the
FastAddress
is complete.
NOTICE!
If a keyboard is set to a camera number that already has an
address, that camera also responds to this command.
