106
en | Common User Commands (unlocked)
AutoDome Easy II
F.01U.164.478 | 2.0 | 2010.02
Installation Manual
Bosch Security Systems, Inc.
12
Common User Commands (unlocked)
This chapter details the commonly used Bosch keyboard setup
commands. See
Section 14 Keyboard Commands by Number,
page 115
, for a complete list of commands.
12.1
Setting AutoPan Mode
AutoPan
mode pans the AutoDome Easy II camera 360º or pans
between user defined limits (when programmed). The
AutoDome Easy II camera continues to pan until stopped by
moving the joystick.
To pan 360º:
1.
Press
ON-1-ENTER
.
2.
Move the joystick to stop the pan.
To set left and right pan limits:
1.
Move the camera to the starting position and press
SET-
101-ENTER
to set the left limit.
2.
Move the camera to the end position and press
SET-102-
ENTER
to set the right limit.
To start AutoPan between limits:
1.
Press
ON-2-ENTER
.
2.
Move the joystick to stop the pan.
12.2
Setting Preset Shots
Preset shots are saved camera positions. Shots are saved as
scenes, therefore, the terms
SHOT
and
SCENE
are used
interchangeably.
To set a Shot:
1.
Move the camera to the position you want to save.
2.
Press
SHOT-#-ENTER
where
#
can be a number from 1 to
99 that identifies the camera position of the scene.
To view a Shot:
Press
SHOT-#-ENTER
where # is the number of the scene
position you want to view.
