Hydraulics training system WS290 | RE 00225-B/12.15
Bosch Rexroth AG 79/104
Operation
10.3
Resetting the EMERGENCY OFF
All workplaces available at the WS290 training system have an own
EMERGENCY OFF circuit.
The operated EMERGENCY OFF circuit will remain functional until the
EMERGENCY OFF pushbutton is manually unlocked (also check and unlock, if
applicable, the second EMERGENCY OFF pushbutton)!
After the EMERGENCY OFF pushbutton has been unlocked again, the mains
power supply has to be restored using the "Start" pushbutton at the control box.
The "Start" pushbutton at the control box is used to release
the power supply for the sockets and
to the "ON/OFF" switch at the hydraulic power unit.
Before (re-)activation of the mains power supply by means of the "Start"
pushbutton, set the switch at the power unit to "0" first in order to prevent an
immediate start-up of the pump power unit.
The WS290 training system is again ready for operation.
