Hydraulics training system WS290 | RE 00225-B/12.15
Bosch Rexroth AG
7/104
About this documentation
Safety instructions are set out as follows:
Warning sign: Draws attention to the danger
Signal word: Identifies the degree of danger
Type and source of danger: Specifies the type and source of danger
Consequences: Describes the consequences of non-compliance
Precaution: Specifies how the danger can be prevented
Table 1:
Risk classes according to ANSI Z535.6-2006
Warning sign, signal word
Meaning
DANGER
Indicates a dangerous situation which may cause death or
severe personal injuries if not avoided.
WARNING
Indicates a dangerous situation which may cause death or
severe personal injuries if not avoided.
CAUTION
Indicates a dangerous situation which may cause minor or
medium personal injuries if not avoided.
NOTICE
Indicates damage to property: The product or the
environment could be damaged.
1.4.2
Symbols
The following symbols indicate notices which are not safety-relevant but increase
the comprehensibility of the documentation.
Table 2:
Meaning of the symbols
Symbol
Meaning
If this information is not observed, the product cannot be
used and/or operated optimally.
Individual, self-dependent step.
1.
2.
3.
Numbered instruction:
The numbers indicate that the actions must be carried out
one after the other.
SIGNAL WORD
Type and source of danger
Consequences in case of non-compliance
Hazard avoidance measures
<Enumeration>
