82/104 Bosch Rexroth AG
Hydraulics training system WS290 | RE 00225-B/2.15
Maintenance and control
12.2
Maintenance and control plan
In the table below, the works are arranged, initially by care interval and then by
assemblies/parts. The intervals have to be complied with.
Table 11:
WS290 maintenance and control works
WARNING
Danger due to leaking high-pressure hydraulic fluid and parts flying around or
falling down due to incompletely or incorrectly set-up exercise installations!
Risk of minor or serious injury!
Avoid free, uncoupled hose lines.
Make sure that the devices/device components are safely fastened at
the grid.
Never work without safety goggles; there is the risk of eye injuries.
Wear protective gloves as skin contact with the hydraulic fluid may cause dry
and chapped skin.
Wash your hands after contact with hydraulic fluid.
Wear working safety shoes as protection against parts falling down.
When?
What?
Where?
Comments
Daily/prior
to any use
EMERGENCY OFF
pushbutton
Check the function.
Always before
starting the works
Overall training system
Clean the
surrounding of the
training system.
Clean the worktops
and keep
them clear.
Remove any parts
lying around.
Immediately
remove any leaked
fluid from the floor,
bind it with an oil
binding agent and
dispose of it.
Handles
Operating elements
Display and visual
installations, sight glasses
Clean thoroughly.
Before the
beginning and after
the end of the work,
make sure the work
surfaces and
devices and device
kits are clean!
Oil tray under:
Grid
Hydraulic power unit
Dispose of
collected oil
separately.
Clean trays,
oil grids,
rubber inserts.
Do not feed back
collected oil into the
hydraulic circuit
