56/104 Bosch Rexroth AG
Hydraulics training system WS290 | RE 00225-B/2.15
Operating and display elements
7.8
Load simulator, rotatable
To be used, the load simulator has to
stand vertically and at working height,
have bottom clearance of at least 80-100 mm,
be provided with protective covers.
Do not remove the protective covers!
Fig. 36:
WS290 load simulator, rotatable, in "pulling position"
1
Swiveling device with
locking mechanism
2
Handle
3
Transport lock
The swiveling device is fixed in the two end positions with two locking pins which
are engaged by means of a spring.
Never pull out both locking pins simultaneously!
The locking pins are set at the factory and must not be adjusted!
The end position of the load simulator must always be 180º and must always
be fixed by means of the clamping lever!
Prerequisites
Swiveling device with l
ocking mechanism
