Hydraulics training system WS290 | RE 00225-B/12.15
Bosch Rexroth AG 11/104
Safety instructions
2.4.3
Troubleshooting, maintenance and repair
Maintenance and repair works as well as fault finding and troubleshooting
measures require special knowledge and must only be carried out by
qualified experts!
Work on electrical equipment may only be performed by a
specialized electrician.
Specialized electricians are those who can assess the work to be undertaken,
recognize potential hazards and apply the appropriate safety measures due to
their professional training, knowledge and experience, as well as their
understanding of the relevant regulations.
Works on hydraulic components must only be carried out by specialists with
special knowledge and experience in the hydraulic field! Special knowledge of
hydraulics means that the personnel has to
–
Be able to read and completely understand hydraulic plans,
–
In particular completely understand the correlations regarding the installed
safety equipment and
–
Have knowledge of the function and set-up of hydraulic components.
2.5
General safety instructions
Observe the valid regulations on accident prevention and for
environmental protection.
Observe the safety regulations and provisions of the country where the product
is implemented/used.
Exclusively use Rexroth products in technically perfect condition.
Observe all notices on the product.
Persons assembling, operating, disassembling or maintaining Rexroth products
must not be under the influence of alcohol, other drugs or medications
influencing the ability to react.
Only use accessories and spare parts approved of by the manufacturer in order
to exclude hazards to persons due to unsuitable spare parts.
Comply with the technical data and environmental conditions specified in the
product documentation.
The installation or use of inappropriate products in safety-relevant applications
could result in unintended operating conditions when being used which in turn
could cause personal injuries and/or damage to property. Therefore please only
use a product for safety-relevant applications if this use is expressly specified
and permitted in the documentation of the product.
Do not commission the product until you can be sure that the end product (for
example a machine or system) where the Rexroth product is installed complies
with the country-specific provisions, safety regulations and standards of
the application.
