Bosch Rexroth IndraDrive Mi Page 261 Project Planning Manual Download

Page: 261 / 340

Personal injury or property damage by inter‐

rupting or connecting live lines!

WARNING

Interrupting or connecting live lines may cause unpredictable dangerous sit‐

uations or lead to property damage. Therefore:
●

Connect and disconnect plug-in connectors only when they are dry and

de-energized.

●

During operation of the installation, all plug-in connectors must be

locked.

Risk of short circuit caused by liquid coolant

or lubricant!

WARNING

Short circuits of live lines may cause unpredictable dangerous situations or

lead to property damage. Therefore:
●

Provide exposed mating sides of power plug-in connectors with safety

caps when installing or replacing drive components, if you cannot ex‐

clude that they might be moistened with liquid coolant or lubricant.

9.6.2

Notices

The motor cable is a hybrid cable in which the communication line has been

integrated. Only the hybrid cable by Rexroth can ensure the function. It is

supplied as ready-made cable. The outgoing direction of the hybrid cable

cannot be changed subsequently!

Risk of damage by subsequently changing

the outgoing direction of the hybrid cable!

NOTICE

Do not try to reverse the cable outgoing direction of a ready-made connector!

The flexible leads in the connector have individual lengths for each outgoing

direction.

Risk of damage by leakage of the connection

points!

NOTICE

If vibrations affect the hybrid cable: Install strain relief near the connection

points (X103.1, X103.2) so that the connectors are not affected by high vibra‐

tion loads. This can avoid possible leakage (entering liquid).

When ordering the ready-made hybrid cables, always indicate the desired

outgoing direction: See

chapter 5.8.1 "RKH hybrid cable incl. communica‐

tion, technical data" on page 106

Ready-made hybrid cables have been coded in such a way that X103.1 and

X103.2 cannot be interchanged when connecting the cables.

9.6.3

Electrical interfaces

Overall connection diagram

At the first KSM/KMS, always plug the hybrid cable RKH in con‐

nection point X103.1.
Always terminate the unassigned connection at the last

KSM/KMS with a terminal connector RHS.

DOK-INDRV*-KCU02+KSM02-PR03-EN-P

Bosch Rexroth AG

259/337

Rexroth IndraDrive Mi Drive Systems with KCU02 KSM02, KMS02/03, KMV03, KNK03

Mounting and installation

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Summary of Contents for Rexroth IndraDrive Mi





















































































































































































































































































































































Search results

Summary of Contents for Rexroth IndraDrive Mi

Reviews:

Related manuals for Rexroth IndraDrive Mi

Brands by name

Popular brands

Bosch Rexroth IndraDrive Mi, Project Planning Manual

Search results

Summary of Contents for Rexroth IndraDrive Mi

Reviews:

Related manuals for Rexroth IndraDrive Mi

Brands by name

Popular brands