is interrupted. The HAS10.1-001-002-NN accessory is used to fasten the ca‐
ble to the device.
Fig. 6-9:
Cable for unused output coupling
Principle of output coupling
In the case of devices with communication output coupling, the communica‐
tion signals are transmitted to the connection points X108 and X109 via a cir‐
cuit board (see figure: LK_A). If neither a component nor the
has been connected to X108 and X109, the communication in the drive line is
interrupted.
ext
External component or
int
Internal signal processing
LK_A
Internal circuit board for communication output coupling
X_serc
Internal communication interface
Fig. 6-10:
Devices with communication output coupling
In the case of devices without communication output coupling, the communi‐
cation signals are directly transmitted via a circuit board (see figure: LK_B).
Bosch Rexroth AG
DOK-INDRV*-KCU02+KSM02-PR03-EN-P
152/337
Rexroth IndraDrive Mi Drive Systems with KCU02 KSM02, KMS02/03, KMV03, KNK03
Connection points
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
