Bosch Rexroth IndraDrive Mi Page 38 Project Planning Manual Download

Page: 38 / 340

To ensure application-specific use of Drive controllers, device types of differ‐

ent drive power and different interfaces are available.
Typical applications include, for example:
●

Handling and mounting systems

●

Packaging and food machines

●

Printing and paper processing machines

●

Machine tools

Drive controllers may only be operated under the assembly and installation

conditions described in this documentation, in the specified position of normal

use and under the ambient conditions as described (temperature, degree of

protection, humidity, EMC, etc.).

2.2

Inappropriate use

Using the Drive controllers outside of the operating conditions described in

this documentation and outside of the indicated technical data and specifica‐

tions is defined as "inappropriate use".
Drive controllers may not be used, if …
●

they are subject to operating conditions that do not meet the specified

ambient conditions. This includes, for example, operation under water,

under extreme temperature fluctuations or extremely high maximum

temperatures.

●

Furthermore, Drive controllers may not be used in applications which

have not been expressly authorized by Rexroth. Please carefully follow

the specifications outlined in the general Safety Instructions!

Components of the Rexroth IndraDrive Mi system are products of

Category C3 (with restricted distribution) in accordance with

IEC 61800‑3. This Category comprises EMC limit values for line-

based and radiated noise emission. Compliance with this Catego‐

ry (limit values) requires the appropriate measures of interference

suppression to be used in the drive system (e.g., mains filters,

shielding measures).
These components are not provided for use in a public low-volt‐

age mains supplying residential areas. If these components are

used in such a mains, high-frequency interference is to be expec‐

ted. This can require additional measures of interference suppres‐

sion.

Bosch Rexroth AG

DOK-INDRV*-KCU02+KSM02-PR03-EN-P

36/337

Rexroth IndraDrive Mi Drive Systems with KCU02 KSM02, KMS02/03, KMV03, KNK03

Important directions for use

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Summary of Contents for Rexroth IndraDrive Mi





















































































































































































































































































































































Search results

Summary of Contents for Rexroth IndraDrive Mi

Reviews:

Related manuals for Rexroth IndraDrive Mi

Brands by name

Popular brands

Bosch Rexroth IndraDrive Mi, Project Planning Manual

Search results

Summary of Contents for Rexroth IndraDrive Mi

Reviews:

Related manuals for Rexroth IndraDrive Mi

Brands by name

Popular brands