background image

Mounting Positions of Motor-Integrated Servo Drives

IM B5

IM V1

IM V3

Flange mounting on drive

side of flange

The drive electronics of a

motor-integrated servo

drive can be oriented as

desired.

Flange mounting on drive

side of flange, drive side

bottom

Flange mounting on drive

side of flange, drive side

top

Tab. 4-12:

Allowed Types of Installation According to EN 60034-7:1993

Damage caused by penetration of fluids!

NOTICE

If fluid is present at the output shaft over a prolonged time in mounting posi‐

tion IM V3, the fluid may enter the housing and cause damage.
Ensure that fluid cannot be present at the output shaft.

 

4.3.4 

Compatibility with foreign matters

All  Rexroth  controls  and  drives  are  developed  and  tested  according  to  the

state-of-the-art technology.
As it is impossible to follow the continuing development of all materials (e.g.

lubricants in machine tools) which may interact with the controls and drives, it

cannot be completely ruled out that any reactions with the materials we use

might occur.
For this reason, before using the respective material a compatibility test has

to be carried out for new lubricants, cleaning agents etc. and our housings/

materials.

4.3.5 

Motor Paint

As standard, the motors are black (RAL9005).

4.4 

Voltage testing and insulation resistance testing

According to standard, the components of the Rexroth IndraDrive Mi range

are tested with voltage.

Testing

Test rate

Voltage testing

100% (EN 61800-5-1)

Insulation resistance testing

100% (EN 60204-1)

Tab. 4-13:

Applied standards

DOK-INDRV*-KCU02+KSM02-PR03-EN-P 

Bosch Rexroth AG

61/337

Rexroth IndraDrive Mi Drive Systems with KCU02 KSM02, KMS02/03, KMV03, KNK03

General data and specifications

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01  

Summary of Contents for Rexroth IndraDrive Mi





















































































































































































































































































































































Reviews: