Bosch Rexroth EFC 3600, Operating Instructions Manual, Page: 51 / 238

● EFC 3600 has no internal contactor, and will be energized once the
power supply is connected. When the Run key is pressed down (or the
control through terminals is selected), the frequency converter will give
output.
● By factory default, EFC 3600 is set as:
– The frequency converter is started or stopped via the operating pan‐
el control.
– The output frequency is set by the potentiometer on the operating
panel.
● After powering on, please confirm:
– The set frequency is displayed (no error display)
– The monitoring parameter is consistent with the actual situation.
● The frequency converter initially displays output frequency after being
energized. You may change it to another parameter as instructed in
[b0.30] and [b0.31]. The factory defaults are based on standard applica‐
tions with standard motors.
DOK-RCON03-EFC-3600***-IT01-EN-P
Rexroth Frequency Converter EFC 3600 Bosch Rexroth AG
Commissioning
49/235