FPD-7024
|
Operation and Installation Guide | 1.0
Overview
.
Bosch Security Systems, Inc. | 1/10 | F01U008458-03
9
Table 2:
LED Assignments for LED Annunciators 4 and 8
D7030X Zones
Covered
Shown on
7030X
Shown on
D7032 (if
attached)
COMMENTS
1
1 to 16
1 to 8
9 to 16
Combination with lowest option bus address (such as Address 1)
2
17 to 32
17 to 24
25 to 32
Combination with second lowest option bus address (such as
Address 2)
3
33 to 48
33 to 40
41 to 48
Combination with third lowest option bus address (such as
Address 3)
4
49 to 64
49 to 56
57 to 64
Combination with fourth lowest option bus address (such as
Address 4)
5
1 to 16
1 to 8
9 to 16
Fifth combination repeats first combination
6
17 to 32
17 to 24
25 to 32
Sixth combination repeats second combination
7
33 to 48
33 to 40
41 to 48
Seventh combination repeats third combination
8
49 to 64
49 to 56
57 to 64
Eighth combination repeats forth combination
Refer to
Table 3
for the LED display for Zones 49 to 64.
Table 3: LED Display for Zone 49 to 64
LED
Zone
Description
1 49
User
defined
2
50
User defined
3 (reserved)
4
52
General fire alarm monitor waterflow (non-silencable)
5
53
General fire alarm monitor (silencable)
6
(reserved)
7
55
General Supervisory (silencable)
8
56
General Waterflow (silencable)
9 (reserved)
10
58
General supervisory alarm (non-silencable)
11 (reserved)
12
(reserved)
13
61
General waterflow alarm (non-silencable)
14
(reserved)
15
63
General alarm monitor waterflow (non-silencable)
16
(reserved)
1.2.7 Communicator
The communicator can report to two phone
numbers or IP addresses with full single, double,
and back-up reporting. Communicates in SIA,
Modem IIIa2, Contact ID, BFSK, and 3/1 and 4/2
Tone burst formats.
The communicator must be enabled
and configured to operate. The
communicator and phone line monitors
are disabled in the default factory
configuration.