manualshive.com logo in svg

Bosch Access Easy Controller, Hardware Manual

The Bosch Access Easy Controller brings utmost convenience and security to your premises. This state-of-the-art hardware offers seamless access control and advanced functionalities. Unlock its full potential by downloading the comprehensive Hardware Manual for free from our website. Discover the power of Bosch Access Easy Controller today!

Share
Download
background image

22

en | Is Access Easy Controller the Correct Choice for Your Client?

Access Easy Controller

Ver 2.0.0 | 2006.07

Hardware Manual

Bosch Security Systems

2.7 A Web browser program is not available on the computer of the person designated to man-
age the Access Easy Controller 's database

You arrived here because a Web browser program is not available on the computer of the per-
son designated to maintain the Access Easy Controller's database.  Because all of Access Easy 
Controller's database screens are written in industry standard HTML language, a Web browser 
is necessary to manage the database.  Either Netscape Navigator version 4.0 and later or 
Microsoft Internet Explorer version 4.0 and later can be used.

Possible solutions:

1.

Install a copy of Web browser program on one or more computers.  Both Microsoft and 
Netscape offer their browsers for the download free of charge over the Internet.  Browser 
programs are available for Window , Apple/Macintosh , and Unix operating systems.  The 
Access Easy Controller can communicate with either the Netscape browser or the 
Microsoft browser running under any of the standard operating systems (Windows, 
Apple, or Unix).

2.

Dedicate a new computer configured with a browser to work with Access Easy Control-
ler.

2.8 Customer's network can't support static addresses

You arrived here because the customer's network configuration is not capable of supporting 
static IP addresses.  Many times, a customer's network is configured to support Dynamic 
Address Allocation.  Under Dynamic Address Allocation procedures, each time a computer 
signs on to the network it will be allocated an IP address.  The address assigned to a com-
puter under dynamic address allocation rules will vary from one login session to the next.

Possible solutions:

1.

Configure the network to support static addresses.  Customers should check with their IT 
department or computer vendor.  Most networks that are configured for Dynamic 
Address Allocation will also support static addressing.

2.

The customer can provide a non-networked computer to work with Access Easy Control-
ler.  This computer will need to be configured for 10 MB Ethernet and TCP/IP protocol.  
This computer can then be directly connected to the Access Easy Controller using the 
crossover type cable.

i

NOTICE! 

There are several third party browser programs available on the marketplace. None of these 
have been validated by Bosch for proper operation with Access Easy Controller.

Summary of Contents for Access Easy Controller












































































































































































































Reviews:

No comments

Related manuals for Access Easy Controller

Falcon RS500 Owner'S And Installer'S Manual preview
RS500
Brand: Falcon Pages: 3
Balboa Instruments EL Series Hot Sheet preview
EL Series
Brand: Balboa Instruments Pages: 10
Badger Meter PC100 Installation And Operation Manual preview
PC100
Brand: Badger Meter Pages: 20
UniPi Technology Patron S107 Quick Start Manual preview
Patron S107
Brand: UniPi Technology Pages: 4
Contemporary Research ICA-FT6 Product Manual preview
ICA-FT6
Brand: Contemporary Research Pages: 22
Burkert 8745 MFC Ethernet Operating Instructions Manual preview
8745 MFC Ethernet
Brand: Burkert Pages: 70
Shimaden SR80 Series Instruction Manual preview
SR80 Series
Brand: Shimaden Pages: 16
CP Electronics AR-SG-4SM-W Product Manual preview
AR-SG-4SM-W
Brand: CP Electronics Pages: 12
Oomlout ARDX Experimenter'S Manual preview
ARDX
Brand: Oomlout Pages: 32
DH Instruments MPC1-1000 User Manual preview
MPC1-1000
Brand: DH Instruments Pages: 30
MQ Multiquip DCA20SPXU2 Operation And Parts Manual preview
DCA20SPXU2
Brand: MQ Multiquip Pages: 74
VADDIO HOT-SHOT Installation And User Manual preview
HOT-SHOT
Brand: VADDIO Pages: 16
ETI PFC 12 RS User And Service Manual preview
PFC 12 RS
Brand: ETI Pages: 14
WAGO 750-8202/040-000 Manual preview
750-8202/040-000
Brand: WAGO Pages: 418
Harsen GU641A Operation Manual preview
GU641A
Brand: Harsen Pages: 55
Wabtec Ricon 55914 Installation Instructions preview
Ricon 55914
Brand: Wabtec Pages: 5
YASKAWA JEPMC-BU3301-E Instruction Manual preview
JEPMC-BU3301-E
Brand: YASKAWA Pages: 27
iGrid T&D iGW Series User Manual preview
iGW Series
Brand: iGrid T&D Pages: 47

Brands by name

Popular brands

Load more brands