76
en | Dial-Up Networking
Access Easy Controller
Ver 2.0.0 | 2006.07
Hardware Manual
Bosch Security Systems
6.
After successfully connecting, open your browser and enter the controller's address in
the address or location bar of the browser and press ENTER. If you have successfully
connected to the controller, the Access Easy Controller screen Login screen is displayed.
7.
Enter the User ID and Password, then click Login.
10.9
Handling Simultaneous Network and Dial-in Connections
In the unusual case where a user may attempt to connect to Access Easy Controller over a
dial-up connection from a computer that is on the same local area network as the controller,
there is a possibility that Internet Explorer may not be able to establish the dial-up connection
with the controller. There is a setting on the computer that can be changed to force the
browser to use the dial-up connection.
In the Windows operating system, go to Settings, Control Panel and select the Internet
Options. Click on the Connections table and make sure the option Always dial my default con-
nection is selected. Note that the wording and location of this option will vary slightly
depending on operating system version.
