22
| English
3 609 929 C62 | (9.12.13)
Bosch Power Tools
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardisation documents: EN 60745
according to the provisions of the directives 2009/125/EC
(Regulation 1194/2012), 2011/65/EU, 2004/108/EC,
2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 26.11.2013
Assembly
Delivery Scope
These industrial cordless angle wrenches are supplied with-
out insertion tools, angled screw head, straight screw head,
battery pack, battery charger, constant voltage regulator or
voltage adapter.
The voltage adapters are to be used exclusively for connec-
tion of Bosch industrial cordless angle wrenches to the
4EXACT constant voltage regulator.
These industrial cordless angle wrenches are supplied with-
out insertion tools, flat drive, connection flange, battery pack,
battery charger, constant voltage regulator or voltage adapt-
er.
The voltage adapters are to be used exclusively for connec-
tion of Bosch industrial cordless angle wrenches to the
4EXACT constant voltage regulator.
These industrial cordless angle wrenches are supplied with-
out insertion tools, angled screw head, straight screw head,
battery pack and battery charger.
These power tools are not suitable for operation with constant
voltage regulator.
These industrial cordless angle wrenches are supplied with
angled screw head, but without insertion tools, battery pack
and battery charger.
These power tools are not suitable for operation with constant
voltage regulator.
Operating and Storage Environment
The device is suitable exclusively for operation at en-
closed work sites.
For trouble-free operation of the device, the allowed
ambient temperature should lie between –5 °C and +50 °C
(23 °F and 122 °F) at an allowed relative humidity of be-
tween 20 and 95 %, free of dew.
In order to avoid damage to the battery cells, the battery pack
should be stored within a temperature range between 0 °C
(32 °F) and 45 °C (113 °F).
Mounting the Angled Screw Head
On these industrial cordless angle wrenches, a fitting angled
screw head (see “Angled drive head”, page 21) has to be
mounted first.
Make sure that the rotational direction switch is in the
middle position (switch-on lock) or that the battery
pack has been removed from the power tool before
mounting a screw head, adjusting or dismounting.
Hold the power tool with the open-end spanner
6
by the span-
ner flats
5
of the angled head flange.
Never clamp the tool by the housing shells!
Mount the angled screw head
3
onto the flange in the request-
ed position and tighten the sleeve nut with the open-end
spanner
4
via the spanner flats
19
.
Hold the angled head flange with the open-end spanner
6
to
prevent turning.
On these industrial cordless angle wrenches, a fitting flat
drive has to be mounted first.
Different flat drives are available on the market. Please in-
quire for the fitting flat drive at your specialist shop.
Observe the mounting instructions of the flat drive.
These industrial cordless angle wrenches can only be operat-
ed with the angled screw head 0 607 451 618.
Suspension Device
With the utility clip
8
, the machine can be attached to a sus-
pension device.
Fasten the utility clip
8
to the machine by engaging it into the
fastening slots
15
.
Regularly check the condition of the utility clip and the
hook of the suspension device.
Charging Procedure
Note:
Battery charger and battery packs are not included in
the delivery scope.
The power plug shown can vary from the one on your power
tool.
Please take care, that the charger and the battery pack
are suitable for your country specific electricity net-
work.
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
ANGLE EXACT
2
|
3
|
6
|
7
|
8
|
15
|
17
|
23
|
30
ANGLE EXACT
14CF
|
22CF
|
29CF
ANGLE EXACT
7–900
|
10–650
|
14–420
|
25–200
|
30–300
ANGLE EXACT
25–250
|
30–380
|
40–280
|
50–210
|
60–170
ANGLE EXACT
2
|
3
|
6
|
7
|
7–900
|
8
|
10–650
|
14–420
|
15
|
17
|
23
|
30
ANGLE EXACT
14CF
|
22CF
|
29CF
ANGLE EXACT
25–200
|
30–300
OBJ_BUCH-412-002.book Page 22 Monday, December 9, 2013 5:34 PM
