Bomar SV 330 DGH, Operating Instructions Manual

Page: 9 / 113

9
B
e
z
p
e
č
n
o
s
tn
í p
o
k
y
n
y
S
ic
h
e
rh
e
its
h
in
w
e
is
e
S
a
fe
ty
n
o
te
s
The operating instructions must be read by any person, who gets in contact
with the machine during transportation, installation, using, servicing,
reparation, stocking or removal!
The operating instructions include relevant information. The operator must
familiarize himself with the installation and operation, safety notes and
machine servicing, to reach maximum reliability and lifespan. The operating
instructions serve to avoid risks, which are linked with work on the machine.
Before transporting and using the machine, please read the instructions
thoroughly!
1.1. Machine determination
The band saw SV 330 DGH is determined for cutting and shortening of rolled
bars, drawn bars and profiles from steels, stainless steels, non-ferrous metals
and plastics with changeable cutting angle from -60° to 60°.
Combustible materials are excluded from cutting! Any other usage and
operation outside this range are unauthorized and the manufacturer/supplier
does not accept any responsibility for any damages resulting from such
misuse. The operator has full responsibility!
The machine is equipped with safety and protective measures for both the
operator and the machine to be protected. Nevertheless, these measures
cannot prevent all injuries. All personnel must read this chapter and
understand it, before they start to work on the machine. Always follow the
safety instructions! The personnel must take into account other aspects of
the risk, which include the conditions of the working place and the material.
1.2. Protective clothing and personal safety
Wear fitting clothes! Loosely fitting clothes may be caught in moving machine
parts and cause serious injuries.
Wear protective gloves! Material cuts and saw band have sharp edges and
may cause injuries.
Wear protective shoes with antiskid soles! Unsuitable shoes may cause
loss of balance and following injury. Dropped blank cuts may cause injuries
too.
Wear protective goggles! Flung chips and cooling liquid may damage your
eyes.
Always wear ear protection! Most of the machines generate acoustic
pressure up to 80 dB and may damage your unprotected hearing.
Do not wear jewellery and always tie back long hair! Moving machine parts
can catch jewellery or loose hair and may cause serious injuries.
Attention!
Gloves can be worn only when manipulating with
material or replacing parts! The machine and its
accessories must be inactive!
If the machine is running, you must not wear gloves!
There is a higher risk of getting caught in moving
machinery!
Attention!
Mind the safety signs on the machine. Do not remove or
damage them! Keep these labels always readable!
Attention!
The operating instructions must be available at the
machine! Keep the operating instructions in a good
condition!