Bomar SV 330 DGH, Operating Instructions Manual

Page: 40 / 113

40
Manual version: 2.00/May 2016
Manual rev.: 2
O
v
lá
d
á
n
í
s
tr
o
je
B
e
d
ie
n
u
n
g
d
e
r
M
a
s
c
h
in
e
M
a
c
h
in
e
c
o
n
tr
o
l
3.3. Machine control
3.3.1. Semi-automatic cycle
Cutting:
1. Move the saw frame into the initial position (further from vice) by button
“5“.
2. Set the cutting angle (see chapter Angular cut setting).
If you want to make a vertical cut (i.e. 0°), screw the auxiliary metal boards
to the fixed vice jaws (see below).
3. Open the vice.
4. Insert the material into the vice next to the fixed vice jaw.
5. Press the locking pin, release the locking lever, move the moveable jaw of
the vice to the distance cca 5mm from material and lock the lever again.
6. Clamp the vice.
7. Set the speed of saw frame movement by the throttle valve.
8. Select the speed of the saw band by switch “3“.