Bomar SV 330 DGH, Operating Instructions Manual

Page: 13 / 113

13
B
e
z
p
e
č
n
o
s
tn
í p
o
k
y
n
y
S
ic
h
e
rh
e
its
h
in
w
e
is
e
S
a
fe
ty
n
o
te
s
1.6.3. Saw band stretching and rupture inspection
This device checks the saw band tension and causes immediate machine halt
if the band accidentally ruptures.
The device includes a limit switch. Its adjustment is described in chapter
„Maintenance“. Check the switch carefully and periodically – adjust it if
necessary
1.6.4. Saw band cover
This protective cover envelops the saw band stretching from the guiding cube
to the arm.
Never switch on the saw if this cover is not mounted!
1.7. Safety instructions for cooling system
1.7.1. Instructions for first aid
1. Pull off and safely remove polluted, soaked clothing.
2. If inhaled, go outside on fresh air or look for first aid treatment.
3. Wash with water and eventually treat with crème any points of contact with
the skin.
4. Rinse your eyes with water and seek out a doctor.
Attention!
When handling the coolant always keep to the work
safety directives and instructions of the manufacturer.
When handling cooling agents always wear safety
fluid-proof gloves!
Wear protective goggles!
Cooling liquid can get in contact with your eyes and
may cause severe injuries