Bomar SV 330 DGH, Operating Instructions Manual

Page: 54 / 113

54
Manual version: 2.00/May 2016
Manual rev.: 2
Ú
d
rž
b
a
s
tr
o
je
W
a
rt
u
n
g
M
a
c
h
in
e
s
e
rv
ic
e
4.4.7. Saw frame furthermost position stop adjustment
This stop limits the furthermost position of the saw frame from the vice. This
stop has to be checked at least once a month.
If the lower stop is adjusted incorrectly
1. Move the saw frame to the furthermost position
2. Release the nuts of the adjusting screw and adjust the stop
3. Fasten the adjusting screw with the nuts again
4. Set the limit switch of the furthermost arm position
4.4.8. Adjustment of the end switch of saw frame furthermost
position
If you have adjusted the furthermost stop of the saw frame, the limit switch
adjustment inspection is required
Setting check
Move the arm to the furthermost position. If the arm rests on the furthermost
stop and the switch reacts, the setting is correct. In other case carry out the
switch setting.