Bomar SV 330 DGH, Operating Instructions Manual

Page: 62 / 113

62
Manual version: 2.00/May 2016
Manual rev.: 2
Ú
d
rž
b
a
s
tr
o
je
W
a
rt
u
n
g
M
a
c
h
in
e
s
e
rv
ic
e
4.8.2. Saw band guiding rollers replacement
If the saw band is not sufficiently guided by guiding rollers and/or if the rollers
are obviously worn, the rollers should be replaced.
Attention! Guiding rollers must be replaced on both guiding cubes!
1. Remove the hosepipe leading to the cooling agent tank and dismantle the
saw band and saw band guiding cube.
2. Grip the guide cube in a vice and screw out both fastening screws of the
eccentrics.
3. Pull both guiding rollers from their eccentrics.