Bomar SV 330 DGH, Operating Instructions Manual

Page: 37 / 113

37
O
v
lá
d
á
n
í s
tr
o
je
B
e
d
ie
n
u
n
g
d
e
r M
a
s
c
h
in
e
M
a
c
h
in
e
c
o
n
tr
o
l
3.1. Starting the band saw
»
Turn the main switch into position 1 – ON. Main switch is placed on the
control panel at the front.
3.1.1. Throttle valve
The valve regulates the movement of saw band into cut. Throttle valve is
located on the left side at the front above the control panel (see arrow).
Note!
If the throttle valve is tightened too much when being
closed, the valve seat can be worn out, which will
cause its leakage. Always tighten the valve gently.