Bomar SV 330 DGH, Operating Instructions Manual

Page: 3 / 113

3
EC Declaration of Conformity
1) 2)
We:
BOMAR, spol. s r.o.
T
ě
žební 1236/1
627 00 Brno, Czech Republic
Id. No: 48908827
declare herewith
that the following designated device based on its conception and construction as well as the design launched by us
meets the relevant basic safety requirements of the decrees of the government.
This statement applies exclusively to the machine device in conditions in which it was brought to the market. It does not
apply to parts subsequently added by the end user or to modifications performed subsequently by the end user.
In the event of any device modification not approved by us this declaration shall lose its validity
Name: Band Saw
Type : SV330 DGH
Serial number:
Manufacturer BOMAR, spol. s r.o., T
ě
žební 1236/1, 627 00 Brno
Product data
Determination:
for cross dividing and cutting of rolled and towed bars and profiles made of steel, stainless steel,
non-ferrous metals and plastics
Description:
stand, table, cutting unit with the saw band and drive, clamping device, cooling system, el. switch
board with control panel.
Pneumatic NO YES Hydraulic NO YES Control system NO YES
Technical data: Cutting rate 32/64 m.min-1
Cutting angle -60° to 60°
Total dimensions in mm (l×w×h) 1490×790×2000
Supply voltage 400 V TN-C-S, 400 V TN-C
Total power requirement 1,6 kW
Weight 380 kg
Documentation:
Technical documentation for this machine device was elaborated in compliance with Government regulation no.
176/2008, Annex 7, part A.
The device meets relevant requirements of the given
directives:
2006/42/EC
2004/108/EC
The applied harmonized standards, National standards and technical specifications:
Č SN EN ISO 12100:2011 Č SN EN 13898+A1:2009 Č SN EN ISO 13857:2008
Č SN EN ISO 4413:2011 Č SN EN 60204 -1 ed.2+A1:2009
Č
SN EN 55011
ed.3+A1:2011
Č SN EN 61000-6-2 ed.3:2006 Č SN EN 61000-6-4 ed.2+A1:2011
The product is safe on condition of the common and determined usage.
The conformity judging was performed according to §12, par. 3, let. b), of the Law no. 22/1997 Coll. as amended.
The declaration of conformity was carried out in the cooperation with the
3)
TÜV SÜD Czech s.r.o, Novodvorská 994, 142
21 Prague 4 – Czech Republic, Identification number: 63987121 - Inspection body no. 4002.
The inspection certificate no 02.676.957
was issued.
Brno,.16.05.2016
Alfred Pichlmann, Managing Director
Point of issue, datum Name and function of the responsible subject,
signature
1) Name, address and identification number of the subject issuing the conformity declaration (producer of importer)
2) Person authorized to complete the technical documentation
3) The authorized or accredited body co-operating on the conformity judging
!
If the equipment is installed without safety equipment offered by BOMAR, spol. s ro or its agents and used by the
customer (or buyer) then EC declaration loses validity.
EC Declaration of conformity is valid only if customer (buyer) installed the BOMAR safety equipment with the machine or
with some other with equivalent safety device in accordance with current applicable regulations and standards.
All machine elements and components that were built into the device by BOMAR, spol. s ro have been declared
"identical" to a safety device, as offered by BOMAR, spol. s ro or its agents.