90
2.2.3
Installation
2.2.3.1
The control panel is installed on walls or other structures of the protected premises in
places protected from atmospheric precipitation and mechanical damage.
2.2.3.2
During installation, it is necessary to fix the device on the wall in a convenient place. If
the device is installed in an unprotected room, it is recommended to install it at a height of at least 2.2 m
from the floor.
2.2.3.3
Installation of the control panel is carried out in accordance with RD 78.145-92 “Rules
for the production and acceptance of works. Installations of security, fire and security and fire alarms ‘.
2.2.3.4
Make sure the wall on which the unit is installed is solid, level, clean and dry.
2.2.3.5
Mark out and drill 4 holes according to the installation dimensions in Figure 2.1.
2.2.3.6
Install the wall plugs into the holes and screw the supplied screws into them so that the
distance between the screw head and the wall is approx. 7 mm.
2.2.3.7
Remove the cover of the connectivity compartment by pulling its latches to the sides.
2.2.3.8
Hang the device on 4 screws and fix it to the wall.
2.2.3.9
After installing the panel, connect all communication lines shall be connected in
accordance with 2.2.4
