71
After the second press of the Enter button, the network address and the response pause will be
changed. After 5 short beeps, the panel will return to the Installer menu.
To cancel the reset of the network address, response pause and to return the panel to Quiescent
mode, press the Key button.
If within 20 seconds after selecting the menu item, two presses of the ‘Enter’ button are is not
pressed twice, the panel returns to Quiescent mode.
Return to Quiescent mode is accompanied by a short triple beep.
1.4.5.72
The
Reset configuration. Delete all credentials
menu item allows returning device to
default configuration.
This Reset can be effective only if the Prohibit Default Reset is not selected.
This Reset deletes all credentials stored in the panel memory and restores two default credentials:
–
Administrator credential
(
PIN – code “1234”
);
–
Installer
credential (
PIN – code “123456”
).
When the menu item is selected, indicator “12” turns steady red and the “Access” indicator is off.
To reset
the configuration and delete all credentials
press the Enter button twice.
After the first press of the Enter button, indicator ‘12’ will turn intermittent red.
After the second press of the Enter button, the configuration is reset and all credentials are deleted.
The panel will return to the Installer menu.
To cancel the deleting all credentials and to return the panel to Quiescent mode, press the Key
button.
When trying to reset the configuration and all credentials, errors may occur. The possible errors
are described in Table 1.4.4.15.
Table 1.4.4.15
All Credentials Reset Errors
Error Description
Error Code
(Indicator No)
Error saving credential/configuration
1
The Prohibit Factory Reset parameter is enabled
2
If an error occurs while deleting all credentials, indicator ‘12’ is off; the panel displays an error
code for 3 seconds by turning a corresponding indicator intermittent red. For example, if the error code is
1, the indicator ‘1’ will be turned intermittent red for 3 seconds
The display of the error code is accompanied by a long beep.
After successful deleting all credentials or error code indication, the panel returns to the
Administrator Menu mode.
If, within 20 seconds after selecting a menu item, the Enter button is not pressed twice, the panel
returns to the Quiescent mode.
Return to the Quiescent mode is accompanied by a short triple beep.
The default configuration is effective after the panel reboot.
1.4.5.73
The
Set Network Address
menu item allows you to manually change the panel address.
This can be useful when it is impossible to change the device address using the network
controller due to an address conflict.
