74
1.4.5.76
The Bootloader allows you to manually switch the panel to the Device Failed mode
(bootloader mode). This can be useful in case of difficulties arising when trying to update the
firmware of the panel with specialized programs (‘Uprog.exe’, etc.).
When the specified menu item is selected, the “17” indicator turns on solid red, and the
“Access” indicator turns off.
To switch the panel to the bootloader mode, press the Enter button twice.
After the first pressing of the ‘Enter’ button, the ‘17’ indicator will turn on with an intermittent
red color.
After pressing the Enter button the second time, the device will switch to the bootloader mode.
To cancel the operation and return the device to Quiescent mode, press the button.
If, within 20 seconds after selecting a menu item, the Enter button is not pressed twice, the panel
returns to the Quiescent mode.
Return to the Quiescent mode is accompanied by a short triple beep.
1.4.5.77
The menu item ‘
Device Reboot
’ allows manually restarting the panel. When the
specified menu item is selected, the “18” indicator turns on continuous red, and the “Access”
indicator is off.
To restart the panel, press the Enter button twice. After the first press of the Enter button, the ‘18’
indicator will turn intermittent red . After the second pressing of the Enter button, the panel is restarted.
To cancel the reset and return the panel to
Quiescent
mode, press the
_____
button. If within 20
seconds after selecting a menu item, the ‘Enter’ button is not pressed twice, the panel
returns to the
Quiescent mode. Return to the
Quiescent
mode is accompanied by a short triple beep.
1.4.5.78
The Change Installer Credential menu item allows changing a credential of an
administrator.
It is highly recommended to change a default installer credential (PIN code) to prevent an authorized
access to the panel.
In addition, the installer credential shall be changed if it is compromised.
There are no restrictions on type of credential to replace an administrator credential, in other words
it can be a Touch Memory (iButton) token or PIN code.
When this menu item is selected, “19” indicator turns continuous red, and the “Access” indicator
turns on with an intermittent green color (an invitation to enter a PIN code or present a token).
To add a Touch Memory token as a new installer credential, it shall be presented to the panel
reader.
To add a PIN code as a new installer credential, the following shall be done:
–
enter new PIN-code using buttons ‘1’ ... ‘10’ (button ‘10’ corresponds to number ‘0’);
–
press the Enter button.
–
e-enter new PIN code using buttons ‘1’ ... ‘10’ (button ‘10’ corresponds to number ‘0’);
–
Press the Enter button again
If the length of the entered PIN-code is equal to the maximum possible, pressing the Enter button
is not required. The maximum possible length of the PIN-code is defined
Maximum PIN Length
Double entry of the PIN-code eliminates a wrong entry.
