bolid SIGNAL-20M User Manual Download Page 55

Page: 55 / 106

The program is blocked (inhibited) blocked as long as the conditions for its start are preserved

(corresponding to the states of the inputs associated with this output).

The program can be resumed:

- manually, by pressing the button START button again;

- automatically, after resetting the alarm states of all inputs and the subsequent repeated activation

of at least one input associated with this output (i.e., the repeated occurrence of the program run

condition).

1.4.5.36

In the

Local Control

mode, the panel interacts with the network controller in the same

manner as in the

Quiescent

mode.

1.4.5.37

Switching to the Quiescent mode from the Local control mode is performed by the

following way:

–

Manual using the

____

button

–

Automatically after 20 seconds after the last action (button presenting or credential

presenting).

1.4.5.38

The panel can go to the

Centralized Control

mode, if it is connected to the network

controller. This can be done in the following manners:

–

from the PIN Entry mode, after entering the PIN-code (password) which is not enrolled in the non-

volatile memory of the device;

–

from the ‘Quiescent or PIN Entry, after presenting a credential to the reader that is not stored in the

nonvolatile memory of the panel.

Switching to the Centralized Control mode is accompanied by turning off the indicators ‘1’ ... ‘20’, which
emphasizes that at the moment, the panel provides the centralized control of the portion rather than its
own inputs.

1.4.5.39

In Centralized Control mode, the panel:

–

monitors logical states of the inputs;

–

monitors the status of the outputs;

–

controls the outputs depending on the current state of the inputs (locally);

–

monitors the state of the power inputs;

–

monitors the condition of the enclosure;

–

generates events about all changes in the device elements (inputs, outputs, housing and power

inputs);

–

allows arming / disarming partitions under the control of the network controller

–

interacts with the network controller.

1.4.5.40

In the

Centralized Control

mode, the panel monitors all element (inputs, outputs,

power inputs and enclosure) in the same manner as in the

Quiescent

mode.

1.4.5.41

In the Centralized Control mode, the panel arms/disarms partitions as instructed from

the controller.

For the purpose of the centralized control, user credentials are enrolled in the database of the

network controller with the corresponding privileges. For more details, see the User Guide of the network
controller.

Summary of Contents for SIGNAL-20M











































































































Search results

Summary of Contents for SIGNAL-20M

Reviews:

Related manuals for SIGNAL-20M

Brands by name

Popular brands

bolid SIGNAL-20M, User Manual

Search results

Summary of Contents for SIGNAL-20M

Reviews:

Related manuals for SIGNAL-20M

Brands by name

Popular brands