61
1.4.5.54
The
Edit User Credential by Number
allows editing user credential rights for arming and
disarming individual inputs.
It differs from the Edit User Credential by need to specify the credential number to edit the its
rights without presenting the credential itself.
When the specified menu item is selected, the “13” indicator turns on with a continuous green
color, and the “Access” indicator is off.
.
To change user credential rights, the following must be done:
–
enter a credential number buttons ‘1’ ... ‘10’ (button ‘10’ corresponds to number ‘0’);
–
press the Enter button.
The number can be entered in the format of one, two and three characters, for example, ‘7’, ‘07’
and ‘007’ mean a credential with number 7. When entering a credential number of three characters,
pressing the Enter button is not required.
After entering a credential, the panel displays the rights of this credential on its indicators.
The procedures for displaying, editing and saving user credential rights are the same as described
in the
Edit User Credential Rights
menu.
Errors possible during editing are similar to the errors described in the Edit
User Credential
Rights
menu.
1.4.5.55
The
Replace User Credential
option allows replacing a credential without changing
user rights. It may be useful if the credential is compromised.
There are no restrictions on type of credential to replace it, in other words Touch Memory
(iButton) can be replaced with PIN code and vice versa.
When this menu item is selected, the “14” indicator turns on with a continuous green color, and
the “Access” indicator turns on with an intermittent green color (an invitation to enter a PIN code or
present a token).
To replace a Touch Memory token, it is necessary to present it to the panel reader.
To replace the rights of the user's PIN code, you must:
- enter this PIN-code using buttons ‘1’ ... ‘10’ (button ‘10’ corresponds to number ‘0’);
- press the Enter button.
If the length of the entered PIN-code is equal to the maximum possible, pressing the Enter button
is not required. The maximum possible length of the PIN-code is defined
Maximum PIN Length
After presenting a token (entering PIN), the ‘Access’ indicator starts switching from red to green
with a frequency of 4 Hz within two seconds (PIN-code is accepted), and then turned on again an
intermittent green (invitation to enter PIN or present a token). The panel is waiting for entering a
new PIN code or presenting a token.
For replacing a credential with a Touch Memory token, present a new Touch Memory to the panel
reader
If you need to replace the user credential with a PIN code, you must:
–
enter a new PIN-code using buttons ‘1’ ... ‘10’ (button ‘10’ corresponds to number ‘0’);
–
press the Enter button;
–
make sure that the ‘Access’ indicator within one second starts switching from red to green
with a frequency of 4 Hz (PIN-code is accepted), and then turned on again with an intermittent
green color;
–
re-enter the PIN-code using the buttons ‘1’ ... ‘10’ (button ‘10’ corresponds to number ‘0’);
