FIRE AND ALARM CONSOLE
36
Door 1
, if partition and zone have text descriptions ‘Corridor 1-floor’ and ‘Door
1’ correspondently;
PART: 100
ZONE: 002/007
, if partition and loop have not text descriptions.
Printer:
|------------------------------------------------------------------------------|
| Date Time | Event |Device |Part# Description| User |
|------------------------------------------------------------------------------|
|20.12 17:41:11|INTRUSION ALARM | 2/7 | 100|Corridor 1-floor| |
Loop disarming:
Display:
DISARMED
Door 1
- disarm alarm loop ‘Door 1’.
If key ‘1’ is pressed:
DISARMED
100 002/007
, where 100 – partition number, 002 – device address, 007 – alarm
loop.
If key ‘2’ is pressed:
Corridor 1-floor
Door 1
, where ‘Corridor 1-floor’ is partitiojn name,
а
‘ Door 1’ is alarm
loop name.
Events ‘ARMED PART, ‘DISARMED PART’, ‘PART ARMING’, ‘PART
DISARMING’ include partition number and partition user. At printing address device and
partition control reader number are printed also. Address in device message equal 0, if partitions
controlled at ‘S2000M’ console.
Display:
ARMED PART
Corridor 1-Floor
- partition ‘
Corridor 1-floor
’ armed.
At pressure key ‘3’ user name, who arm partition, can be seen.
At pressure key ‘1’:
ARMED PART
100 U 80
- where 100 is partition number, 80 is user number.
Printer:
|20.12 18:26:59|ARMED PART | 10 S1 | 100|Corridor 1-floor|Administrator |
- partition 100 (‘Corridor 1- floor’) armed 20 December at 18 hours 26 minutes 59 seconds at
reader 1 at device with address 10 by user ‘Administrator’.
Receiving device message, console displays it on LCD and save in event buffer. After 20
seconds console returns to the time displaying mode. After printer switching on the all received
messages will be read from event buffer and printed. Indicators ‘ALARM’, ‘FIRE’, ‘FAULT’
and ‘TROUBLE’ display current console partition states according to the tables 2 - 5.
When parameter ‘ALARM SOUND’ is on (mode with alarm indication) displaying alarm
messages differ from shown above. When console receives one or few alarm messages alarm
sound signal is given according to table 6. LCD shows the alarm message. If console gets few
equal alarm messages it displays the last one. Single console key pressure cancels alarm sound
signal. At the same time printer outputs message ‘ALARM CANCEL’. To cancel displayed on
