S2000M MAINTENANCE
GUIDE
51
Changing own password by user
When in system operating users can change own password values from ‘S2000M’
console. This function is available if parameter “USER CODE PRG” has value “+” (see item
2.2.4.4). By default user can't change his password.
User password change mechanism is described below.
Press button “PRG”.
Type password to be changed.
Following by prompt “CHANGE CODE?” press “ENT” to
continue password changing or “CLR” to canceling operation.
Type new password value.
Type password again. If signal “Error” has sounded it indicates
that first typed password differs from the second typed
password.
2.2.4.6
Console address setting in prorgamming mode
This function changes console address in programming mode. This address is necessary
when configuring the console with the help of “pprog.exe”
Enter in programming menu (press button ‘PRG’).
Type engineer password.
Select “SETTINGS” menu item by “
4
”, “
3
” and “ENT”
keys, or press hot key “5”.
Select “RS485 SETTINGS” menu item by “
4
”,“
3
” keys and
press “ENT”, or press hot key “4”.
Select “S2000 ADDR” menu item by “
4
” and “
3
” keys. To
change address press “ENT”, type new value and press “ENT”.
2.2.4.7
Console address setting in personal computer work mode
Console address in this mode is the address for polling by ‘ARM S2000’ and ‘ARM
Orion Pro’ programs.
Enter to programming menu (press button ‘PRG’).
Type engineer password.
Select “SETTINGS” menu line by “
4
”, “
3
” and “ENT”
keys, or press hot key “5”.
Select “RS232 SETTINGS” menu item by “
4
”, “
3
” keys and
press “ENT”, or press hot key “5”.
Select “S2000 ADDR” menu item by by “
4
” and “
3
” keys.
To change address press “ENT”, type new value and press
“ENT”.
2.2.4.8
Console RS-232 interface operative mode settings
RS-232 outputs of ‘S2000M’ console (GND, DTR and TxD line) can be connected to
printer or personal computer supplied with ‘ARM S2000’, ‘ARM Orion’ or ‘ARM Orion Pro’
software. Depending on connected to console equipment or software RS-232 interface mode
need to be set by corresponded way.
ENTER CODE:_
v
RS485 SETTINGS
S2000 ADDR =127
ENTER CODE:_
v
CHANGE CODE?
NEW CODE:
ENTER CODE:_
v
5 SETTINGS
v
RS232 SETTINGS
S2000 ADDR =127
CONFIRM:
v
5 SETTINGS
