BOGE compressor control airtelligence provis 3
Page 73
Service, dismantling, disposal
7.1
Service
Part 7: Service, dis-
mantling, disposal
7.1 Service
Cleaning the display
To clean the display, use a damp but not wet cloth. If the display is soiled with
oil, add a small amount of commercial household cleaner to the cleaning cloth.
Do not use caustic cleaning agents, thinners or scouring agents!
Software updates
Updating of the control software is usually carried out by BOGE service per-
sonnel and is therefore possible from user level "Service" (see Software
update on page 65).
When operating the control via a PC with a suitable Internet browser, the
browser cache should be cleared regularly and especially after an update.
If the control is updated, the BOGE service personnel will inform you if the
update will result in changes to the functions of the control system.
7.2 Dismantling / Disassembly
Before the display is cleaned, logged-in users should log out so that set-
tings cannot be accidentally changed when wiping the display.
WARNING
Danger to life from electric current!
Touching live parts, defective insulations or components can cause danger
to life.
All work on the electrical system may only be carried out by authorized
electrical specialists.
Before starting work, the connecting cable from the operator's network to
the switch cabinet must be disconnected from the power supply and
secured against being switched on again.
CAUTION
Risk of injury in case of improper dismantling!
Dismantling by unauthorized or unqualified personnel can lead to serious
accidents due to lack of expertise.
Dismantling may only be carried out by authorized and qualified person-
nel.
Always wear your personal protective equipment during dismantling.
Carry out the dismantling with at least two persons.
Protect the switch cabinet from falling down during dismantling by taking
appropriate measures.
