Use of the control
5.2
Compressed airnet view
Page 36
BOGE compressor control airtelligence provis 3
* When changing the unit in general system settings or in a user profile from metric to imperial
Tab. 5.1: Compressed airnet overview - values and meaning
5.2 Compressed airnet view
After selecting a compressed airnet on the compressed airnet overview, the
desired compressed airnet view is displayed. On the one hand, this view is
intended to provide a detailed overview of the status and the most important
values of all components of the compressed airnet. For this purpose, the sta-
tus button
must be selected for the status display in the right-hand selec-
tion area. Here you can view the status and values of the components as a list,
DIN, 2D or 3D representation.
On the other hand, this view enables the user to make essential settings in the
compressed airnet, which allow the compressed air to be supplied according
to the requested time and requirements. This is achieved via the calendar dis-
play
.
The activities of the net can be monitored via the event display
and via the progress display
. The basic setup of the compressed airnet is
carried out via the compressed airnet settings
.
Fig. 5.2: Compressed airnet view - list view unfolded
Compl. flow
m³/min,
cfm*
The current volume flow (compressed air consumption) of
the compressed airnet
Power
kW
Current power of the entire system
CO2 -exhaust
(emissions)
g/m³
Calculated value on the basis of the current power output
Value
Unit
Meaning
The values in the table, which are visualized for each net on the com-
pressed airnet overview, are also displayed horizontally next to each other
in the header area in each version of the compressed airnet view (2nd level)
of the corresponding net.
The compressor symbol and the accessory symbol on the right show the
current operating ability of all compressors and also collectively of any
equipment in the net.
