Use of the control
5.2
Compressed airnet view
Page 52
BOGE compressor control airtelligence provis 3
Fig. 5.12: Compressed airnet view - Progress display
In area (1) a total of 4 operating values can be defined which are to be dis-
played in diagram (2). Each value can be set individually using the 3-point
symbol. The unit scales to the left and right of the diagram are automatically
changed to the correct unit when an operating value is changed. The 3-point
symbol can also be used to determine whether a value of the entire com-
pressed airnet is to be displayed or only that of a single component (e.g. flow
of the entire net or flow of a compressor). The corresponding color of the value
graph in the diagram can be selected individually using the colored rectan-
gles..
The diagram in area (2) shows the development of the defined operating val-
ues (y-axis) as a function of time (x-axis). As soon as you touch any part of the
diagram with your finger or mouse, a line (3) appears in the diagram, which
can be moved horizontally on the time axis. Simultaneously, the operating val-
ues recorded at this time are displayed in a window next to it. In the upper area
of the diagram, the profile that was valid or is currently valid in the selected
period is also indicated (4).
Below the diagram (2) are the progress bars showing the operating status of
all components of the compressed airnet (5). They run on the same time axis
as the diagram. There is an individual progress bar for each compressor and
compressed air receiver. All equipment is grouped under a progress bar, in
this case "HDL Equip" for the name of the equipment module:
Fig. 5.13: Progress bar for the operating status of all components
The color of the bars has the following meaning:
If the narrow upper part of the bar for compressors is light blue, the compres-
sor was requested by
airtelligence provis 3
. The wide lower area shows the
(1)
(2)
(8)
(7)
(5)
(3)
(6)
(4)
(9)
