BOGE compressor control airtelligence provis 3
Page 39
Use of the control
5.2
Compressed airnet view
To change the perspective in this view on the
touch panel
:
1. Keep the touch panel pressed and move your finger in any direction -
move
in the room in the direction the finger is guided.
2. Keep the touch panel pressed and move your finger horizontally to the left
or right -
rotate in the room
.
To change the perspective in this view on a
PC
with a suitable Internet
browser:
1.
Click with the mouse into the picture and press the cursor keys " upwards
" or " downwards " on the keyboard
- move forwards or backwards in the
room.
2. Click with the mouse into the picture and press the cursor keys " to the left
" or " to the right " on the keyboard -
move to the right or to the left in the
room
.
3.
Keep mouse pressed in the picture and drag left or right
- rotate in the
room.
Change arrangement of
components in DIN and
2D representation
Change the connection and arrangement of these two views at the beginning
of the installation of a network and at any time afterwards, so that they always
correspond to the real conditions. The positions of the components in the net,
the connection paths of the compressed air lines (blue) and the connection
paths of the signal lines (black dotted) can be changed.
To enter the edit mode to modify the arrangement:
1. Call up the DIN or 2D representation in the compressed airnet view.
2. Tap / click with the finger or mouse into the middle area of the picture.
3. Keep finger or left mouse button pressed for 2 seconds.
The view is divided into a number of square tiles.
The editing mode is started, see „Fig. 5.6:“, page 40.
To change the position of a component:
1. Tap / click on the "Components" button.
2. Tap/click and hold the desired component.
3. Drag component to any other tile.
4. Release finger / mouse.
The component is in its new position.
The redesign or modification of the arrangement of connections and com-
ponents can only be carried out after login (at least "User" level).
