BMW Z4 Roadster Owner'S Handbook Manual Download Page 334

Page: 334 / 344

Intelligent emergency call

311

Intelligent Safety

168

Intended use

Intensity, AUTO programme

Interior light

Interior light when unlocking

Interior light with the vehicle locked

Interior movement detector

Internet connection

Internet hotspot

Internet site

Interval Display, see Service requirements

147

i-Size child restraint systems

117

ISOFIX, child seat mountings

Jacking points

Joystick, Steptronic transmission

132

Jump-starting connections

313

Jump starting, see Starting assistance

313

Keyless Go, see Comfort Access

Key, mechanical

Key switch for front passenger airbags

166

Kick-down, Steptronic transmission

132

Knee airbag

164

Labelling of recommended tyres

272

Labelling of run-flat tyres

273

Lane boundary, warning

176

Lane Change Warning

180

Lane Departure Warning

176

Language, set on the Control Display

Lashing eyes in the boot

247

Lashing straps, see Lashing eyes in the

Laying up the vehicle

Leather care

LEDs, replacing light-emitting diodes, see Bulbs

and lights

305

Left-hand traffic, light setting

162

Light alloy wheels, care

320

Light-emitting diodes, replacing LEDs, see Bulbs

and lights

Light in exterior mirror, see Crossing traffic warn‐

ing

217

Lighting

157

Light in the exterior mirror, see Lane Change

Warning

Light switch

LIM button, see Manual Speed Limiter

190

List of all messages

246

Loading the boot, see Stowing and securing a

transported load

246

Locking, automatic

Locking, see Opening and closing

Locking settings

Locking with the remote control

Logging on, mobile devices, see Connec‐

tions

Low-beam headlights

158

Luggage compartment lid, see Boot lid

Lumbar support

106

Maintenance

301

Maintenance requirement, see CBS Condition

Based Service

301

Maintenance, see Service requirements

147

Maintenance System, BMW

301

Make-up mirror

238

Malfunction displays, see Check Control

142

Malfunction, remote control

Manual air distribution

Manual air flow

Manual operation, fuel filler flap

267

Manual operation, Steptronic transmission

132

Seite 334

REFERENCE

Everything from A to Z

334

Online Edition for Part no. xxx - X/18

Summary of Contents for Z4 Roadster

























































































































































































































































































































































Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands

BMW Z4 Roadster, Owner'S Handbook Manual

Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands