BMW Z4 Roadster, Owner'S Handbook Manual

Page: 94 / 344

Pressing the button on the remote control
twice in direct succession causes the win‐
dow to be lowered further when the door
is subsequently opened.
Acknowledgement signals of the
vehicle
Via iDrive:
1. "CAR"
2. "Settings"
3. "Doors/Vehicle access"
4. Deactivate or activate desired acknowledge‐
ment signals:
▷ "Flash for lock/unlock"
Unlocking is acknowledged by flashing
twice, locking by flashing once.
▷ With alarm system:
"Acoustic signal for lock/unlock"
Unlocking is acknowledged by an acous‐
tic signal sounding twice, locking by the
acoustic signal sounding once.
Folding the mirrors automatically
Via iDrive:
1. "CAR"
2. "Settings"
3. "Doors/Vehicle access"
4. "Fold mirrors in when locked"
When locking, the exterior mirrors are auto‐
matically folded in, and when unlocking they
are automatically folded out.
Automatic unlocking
Via iDrive:
1. "CAR"
2. "Settings"
3. "Doors/Vehicle access"
4. "Unlock at end of journey"
After the drive-ready state has been switched
off by pressing the start/stop button, the
locked vehicle is automatically unlocked.
Automatic locking
Via iDrive:
1. "CAR"
2. "Settings"
3. "Doors/Vehicle access"
4. Select the desired setting:
▷ "Lock automatically"
The vehicle is automatically locked again
after a short while if no door is opened af‐
ter unlocking.
▷ "Lock after pulling away"
On driving off, the vehicle is locked auto‐
matically.
Boot lid
Boot lid and doors
Depending on the equipment and the country
specifications, these settings may not be avail‐
able.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Key button assignment"
4. Select the symbol.
5. Select the desired setting:
▷ "Tailgate"
Boot lid is opened.
▷ "Tailgate and door(s)"
Boot lid is opened and the doors are un‐
locked.
Seite 94
CONTROLS
Opening and closing
94
Online Edition for Part no. xxx - X/18