BMW Z4 Roadster Owner'S Handbook Manual Download Page 146

Page: 146 / 344

Fuel gauge

Principle

The current fill level of the fuel tank is displayed.

General

The angle of the vehicle may cause the display
to fluctuate.
Notes on refuelling, see page

266

Display

An arrow next to the petrol pump
symbol shows which side of the
vehicle the fuel filler flap is on.
The current range is displayed as
a number.

Revolution counter

It is vital to avoid engine speeds in the red warn‐
ing zone. In this zone, the fuel supply is interrup‐
ted to protect the engine.

Shift Lights

Principle

The shift lights indicate the maximum shift point
at which the best possible acceleration can be
achieved.

Operating requirements

Shift Lights are displayed when the SPORT or
SPORT PLUS drive programme is activated.

Switching on Shift Lights

Select SPORT or SPORT PLUS driving
mode.
To do this, press the drive experience switch.

Activate manual mode M of the gearbox.

Display

▷

Current engine speed is shown in the revolu‐
tion counter.

▷

Arrow 1: yellow buttons lighting up succes‐
sively indicate the increase in revs.

▷

Arrow 2: orange buttons lighting up succes‐
sively indicate when an upshift is due.

▷

Arrow 3: buttons illuminate red. Latest point
to upshift.

When the maximum permissible engine speed is
reached, the entire display flashes red and the
fuel supply is limited to protect the engine.

Standby state and drive-

ready state

OFF in the revolution counter in‐
dicates that the drive-ready state
is switched off and the standby
state is switched on.

The letters READY in the revolu‐
tion counter indicate that the Auto
Start Stop function is ready for
automatic engine starting.

For more information, see Idle state, standby
state and drive-ready state, see page

Seite 146

CONTROLS

Displays

146

Online Edition for Part no. xxx - X/18

Summary of Contents for Z4 Roadster

























































































































































































































































































































































Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands

BMW Z4 Roadster, Owner'S Handbook Manual

Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands