BMW Z4 Roadster Owner'S Handbook Manual Download Page 224

Page: 224 / 344

If there is condensation, shut down recirculated-
air mode or remove the condensation, see
page

229

To adjust the air flow manually

Principle

The air flow for air conditioning can be set man‐
ually.

General

To be able to adjust the air flow manually, first
switch off the AUTO programme.

Operation

Press upper or lower side of button: re‐
duce or increase air flow.

Selected air flow is shown on the climate display.
In order to protect the battery the air flow rate is
reduced, if necessary.

To adjust the air distribution

manually

Principle

The air distribution for air conditioning can be set
manually.

Operation

Press the button repeatedly to select a
programme:

▷

Windows, upper body area and footwell.

▷

Upper body area and footwell.

▷

Footwell.

▷

Windows and footwell.

▷

Windows.

▷

Windows and upper body.

▷

Upper body area.

Selected air distribution is shown on the climate
display.

If there is condensation, remove it, see
page

229

Defrosting the windscreen and

removing condensation

Principle

Ice and condensation are quickly removed from
the windscreen and the front side windows.

Switching on/off

Press the button.
The LED is illuminated when the sys‐

tem is switched on.

The air flow can be adjusted manually when the
system is switched on.

If there is condensation on the window,
press the button on the driver's side or

switch on the cooling function. Ensure that air
can flow towards the windscreen.

Rear window heating

Press the button. The LED is illumina‐
ted.

The function is available when the engine is run‐
ning.
The rear window heating is switched off auto‐
matically after a certain period of time.

Microfilter

The microfilter traps dust and pollen in the in‐
coming air.
Have this filter replaced during maintenance, see
page

301

, of the vehicle.

Seite 224

CONTROLS

Climate

224

Online Edition for Part no. xxx - X/18

Summary of Contents for Z4 Roadster

























































































































































































































































































































































Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands

BMW Z4 Roadster, Owner'S Handbook Manual

Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands