BMW Z4 Roadster Owner'S Handbook Manual Download Page 315 | Manualshive

Page: 315 / 344

background image

Towing other vehicles

General

Switch on the hazard warning lights, depending
on local regulations.
If the electrical system of the vehicle being
towed has failed, the vehicle must be made iden‐
tifiable to other road users, for instance by plac‐
ing a sign or the warning triangle in the rear win‐
dow.

Safety notes

WARNING

If the gross vehicle weight of the towing vehicle
is less than that of the vehicle to be towed, the
towing eye can be pulled off, or the vehicle may
no longer be controllable. There is a danger of
accidents. Make sure that the gross vehicle
weight of the towing vehicle is greater than the
weight of the vehicle to be towed.

NOTE

If the tow bar or the towing rope is not attached
correctly, other vehicle parts can be damaged.
There is a danger of damage to property. At‐
tach the tow bar or towing rope to the towing
eye correctly.

Tow bar

The towing eyes of both vehicles should be on
the same side.
If it is impossible to avoid attaching the tow bar at
an angle, note the following:

▷

Tow bar clearance may be limited when cor‐
nering.

▷

The tow bar will generate lateral forces if it is
attached at an angle.

Towing rope

Ensure that the towing rope is taut when the
towing vehicle drives off.
Use nylon ropes or straps, which will enable the
vehicle to be towed without jerking.

Towing eye

General

Always keep the screw-on towing eye on board
the vehicle.
The towing eye can be screwed into the front or
rear end of the vehicle.
The towing eye is located in the on-board tool
kit, see page

.

▷

Only use the towing eye supplied with the ve‐
hicle and make sure that it is screwed in fully
and is tight.

▷

Only use the towing eye for towing on paved
roads.

▷

Avoid cross-loads on the towing eye, for ex‐
ample do not raise the vehicle by the towing
eye.

Safety note

NOTE

If the towing eye is not used as intended, the
vehicle or towing eye may be damaged. There
is a danger of damage to property. Observe the
notes on using the towing eye.

Seite 315

Breakdown Assist

MOBILITY

315

Online Edition for Part no. xxx - X/18

«
...
313
314
315
316
317
...
»

Summary of Contents for Z4 Roadster

























































































































































































































































































































































Reviews:

No comments

Related manuals for Z4 Roadster

Brand: Dakota Digital Pages: 2

Brand: Dakota Digital Pages: 7

2011 grand cherokee

Brand: Jeep Pages: 22

2013 Grand Cherokee

Brand: Jeep Pages: 704

Brand: Jeep Pages: 558

Brand: Yakima Pages: 19

UCI-11C NTV-KIT331

Brand: Nav TV Pages: 4

Brand: TATA Motors Pages: 92

Brand: SCC Pages: 4

Brand: Subaru Pages: 2

Brand: Subaru Pages: 328

Brand: Hyundai Pages: 18

2000 Oldsmobile Intrigue

Brand: Oldsmobile Pages: 348

Brand: Rugged Ridge Pages: 3

Brand: Power Acoustik Pages: 4

Brand: Yakima Pages: 15

Brand: PUTCO Pages: 2

2005-2009 Chrysler 300C

Brand: Mopar Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands